2 x Avanti Superlift Centurion & TX4 Garage Door Gate Remote Control

2 x Avanti, Superlift, Centurion & TX4 Garage Door Gate Remote Control (NEW)

Features:

Avanti, Superlift, Centurion & TX4 Garage Door Gate Remote Control (NEW)

Suits remote models: Avanti, Superlift, Centurion & TX4 Garage Door Gate

Compatibility: Slimfit N3588 SDO10 SDO-21 TP/BP RDO10 T12/S12 MPS 12 MPS12 MPS 21 DPS D12/D20 SDO-3 DC SDO-P SDO-1 SDO-21 DPS SDO-21 MPS Avanti TX4 Remote (not compatible with mouse)

Please ensure that your original remote is pictured and your motor model number is listed to ensure compatibility.

Contents:

2 x Compatible Remotes

2 x Key chain

2 x Batteries eManual

Avanti/Centurion Instructions

Coding a new remote: Locate the learn/code set button on the motor (usually under the lamp cover or on the back of the motor). Press the learn button once and immediately releases the button. A light on the motor will illuminate. Press the button on the new remote you wish to operate the door once. The light on the motor will extinguish. Press the same button on the new remote a second time and the light on the motor will begin to flash rapidly. Once the light stops flashing, press the button on the new remote a third time and it will operate the door. If the remote did not successfully code to the motor and you only get a continuous flashing light on the motor, you may have held the learn button down too long. Open and close the door four times using an existing remote and try code in the new remote again.

Please Note: The remote may have a blue film contact on the front of the remote which may appear scratched. This can be peeled off to reveal a metal finish.